학교소개
Professor
국외발표논문
 |
2월 11-12 |
Jeong-Min Lee, Hyunwoo Song, Yongseok Kim, Junghan Yun, Junin Byun, Jae-Mean Koo, Chang-Sung Seok, "Evaluation of Thermal Barrier Coating Applied to the Gas Turbine Blade According to the Thermal Gradient", International Conference on Surface Design and Engineering |
| 2월 11-12 | Yongseok Kim, Jeong-Min Lee, Hyunwoo Song, Junghan Yun, Jungin Byun, Jae-Mean Koo, Chang-Sung Seok, "A Study on Prediction Model for Thermally Grown Oxide Layer in Thermal Barrier Coating", International Conference on Surface Design and Engineering | |
| 2월 11-12 | Hyunwoo Song, Jeong-Min Lee, Yongseok Kim, Junghan Yun, Jungin Byun, Jae-Mean Koo, Chang-Sung Seok, "Evaluation of Thermal Barrier Coating According to Temperature and Curvature", International Conference on Surface Design and Engineering | |
| 6월 23-27 | Dongkeun Lee, Jeong-Min Lee, Yongseok Kim, Sang-Young Kim, Jae-Mean Koo, Chang-Sung Seok, "Thermo Mechanical Fatigue Life Prediction of Ni-based Superalloy IN738LC", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 | Sukwoo Hong, Chang-Sung Seok, Jae-Mean Koo, "Fatigue Life Prediction of Spiral Welded Waterworks Pipe", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 | Yongseok Kim, Jeong-Min Lee, Hyunwoo Song, Junghan Yun, Jungin Byun, Jae-Mean Koo, Chang-Sung Seok, "TBC Delamination Life Prediction Considering Al-diffusion Process of Bond Coat", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 | Keontae Park, Ikhyun Kim, Tao Shen, Sang-Young Kim, Jae-Mean Koo, Chang-Sung Seok, "Evaluation of Plastic Limit Loads for Compact Pipe Specimen in Various Load Ratio", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 |
Jeong-Min Lee, Chang-Sung Seok, Jae-Mean Koo, Yongseok Kim, Hyunwoo Song, Junghan Yun, Jungin Byun, "Evaluation of the Thermal Gradient Fatigue Charateristics of the Thermal Barrier Coating through the Finite Element Analysis", Internatioanl Symposium on Green Manufacturing and Applications 2015 |
|
| 6월 23-27 | Hyunwoo Song, Yongseok Kim, Jeong-Min Lee, Junghan Yun, Jungin Byun, Jae-Mean Koo, Chang-Sung Seok, "Life Prediction of Thermal Barrier Coating Considering Degradation and Thermal Fatigue", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 |
Sung-Hwan Kim, Yongseok Kim, Dongkeun Lee, Chang-Sung Seok, Jae-Mean Koo, Sang-Young Kim, "Analysis of Loosening Mechanism of Bolt in Power Train", Internatioanl Symposium on Green Manufacturing and Applications 2015 |
|
| 6월 23-27 | Tao Shen, Keontae Park, Ikhyun Kim, Sang-Young Kim, Jae-Mean Koo, Chang-Sung Seok, "Evaluation of Fracture Toughness of Curved Equivalent Stress Gradient (Curved ESG) Specimens with Different Thickness", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 | Jaegu Choi, Chang-Sung Seok, Jae-Mean Koo, Nam-Su Huh, Sang-Young Kim, Byunwoo Moon, "Effect of Reverse Cyclic Loading on the Fracture Resistance Curve of Equivalent Stress Gradient(ESG) Specimen", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 | Byungwoo Moon, Chang-Sung Seok, Jae-Mean Koo, Sang-Young Kim, Jaegu Choi, Nam-Su Huh, "Fracture Toughness of Equivalent Stress Gradient Specimen under Dynamic Loading Conditions", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 | Junghan Yun, Jae-Mean Koo, Chang-Sung Seok, Jeong-Min Lee, Hyunwoo Song, "Consideration on the Effect of Preheating Temperature on Residual Stress Generated during APS Process", Internatioanl Symposium on Green Manufacturing and Applications 2015 | |
| 6월 23-27 | Jung-In Byun, Sung-Hyuk Kim, Yongseok Kim, Jae-Mean Koo, Chang-Sung Seok, "Evaluation of Life of APS-TBC according to Heat Deterioration Period by Burnerrig Test", Internatioanl Symposium on Green Manufacturing and Applications 2015 |
 |
6월 21-22 |
Yongseok Kim, Dongkeun Lee, Jeong-Min Lee, Hyunwoo Song, Sung-Hyuk Kim, Jae-Mean Koo, Chang-Sung Seok, Myoungrae Cho, "A Study on Thermal Fatigue Life Variation according to Thermal Exposure Time", 2014 International Conference on Aerospace Engineering |
| 6월 21-22 | Dongkeun Lee, Jeong-Min Lee, Jae-Mean Koo, Chang-Sung Seok, Jaewon Kim, "A Study of TMF Characteristics of Ni-base Superalloy IN738LC", 2014 International Conference on Aerospace Engineering | |
| 7월 06-09 | Suk Woo Hong, Chang-Sung Seok, Jae-Mean Koo, J. W. Kim, J. H. Kim, S. K. Hong, "Study on the fatigue life prediction of API 5L X42 natural gas pipeline", 6th Internaltinal Conference on Engineering Failure Analysis | |
| 7월 06-09 | Keontae Park, Ikhyun Kim, Chang-Sung Seok, Jae-Mean Koo, M.R. Cho, "Method for calculating the J-integral of compact pipe specimen using limit moment", 6th Internaltinal Conference on Engineering Failure Analysis | |
| 6월 24-28 | Hyunwoo Song, Chang-Sung Seok, Jae-Mean Koo, Yongseok Kim, "Evaluation for an Effect of Thermally Grown Oxide (TGO) on Thermal Fatigue Life", International Symposium on Green Manufacturing and Applications 2014 | |
| 6월 24-28 | Jeong-Min Lee, Chang-Sung Seok, Jae-Mean Koo, "Evaluation for the Thermo-mechanical Fatigue Characteristics of the Thermal Barrier Coating considering the Thermally Grown Oxide", International Symposium on Green Manufacturing and Applications 2014 | |
| 6월 24-28 | Sung-Hyuk Kim, Yongseok Kim, Jae-Mean Koo, Chang-Sung Seok, "Life Assessment of APS Coating according to Heat Deterioration Period by using Burner-rig test", International Symposium on Green Manufacturing and Applications 2014 | |
| 9월 15-19 |
Yongseok Kim, Jeong-Min Lee, Hyunwoo Song, Sung-Hyuk Kim, JaeMean Koo, Chang-Sung Seok, SangHun Kim, SungHo Yang, "Analysis on Aging Mechanism of Isothermal Aging and Thermal Fatigue of Thermal Barrier Coating", Science and Applications of Thin Films |
|
| 9월 15-19 | Hyunwoo Song, Yongseok Kim, Jae-Mean Koo, Chang-Sung Seok, "Thermal Fatigue Life Prediction of Thermal Barrier Coating Through Bond Strength", Science and Applications of Thin Films | |
| 9월 15-19 |
Jeong-Min Lee, Dongkeun Lee, Yongseok Kim, Jae-Mean Koo, Chang-Sung Seok, "Prediction of the Thermo-Mechanical Fatigue Life for IN738LC Using the Strain Energy Method", Science and Applications of Thin Films |
|
| 9월 15-19 | Sung-Hyuk Kim, Yongseok Kim, Jae-Mean Koo, Chang-Sung Seok, "Comparison and Evaluation Between Used Gas Turbine Sample and Aged Thermal Fatigue Specimen Through SEM Analysis", Science and Applications of Thin Films | |
| 11월 08-09 | Junghan Yun, Chang-Sung Seok, Jae-Mean Koo, Yongseok Kim, Hyunwoo Song, "Analysis of Factors Affecting the Residual Stress Generated During the Air Plasma Spray Process", International Conference on Advaces in Mechanical, Production and Industrial Engineering | |
| 11월 08-09 | Jaegu Choi, Jae-Mean Koo, Sang-Young Kim, Keontae Park, Byungwoo Moon, Chang-Sung Seok, "The Effect of Change in Thickness of an Equivalent Stress Gradient Specimen on Fracture Resistance Characteristics", International Conference on Advaces in Mechanical, Production and Industrial Engineering | |
| 11월 08-09 | Tao Shen, Sang-Young Kim, Keon-Tae Park, Jae-Mean Koo, Chang-Sung Seok, "Fracture Toughness Test and Stress Triaxiality Analysis on Various Specimens", International Conference on Advaces in Mechanical, Production and Industrial Engineering | |
| 11월 08-09 | Byungwoo Moon, Chang-Sung Seok, Jae-Mean Koo, Sang-Young Kim, Keontae Park, Jaegu Choi, "A Study on the Fracture Resistance Characteristic of Equivalent Stress Gradient Specimen according to Stress Gradient", International Conference on Advaces in Mechanical, Production and Industrial Engineering | |
| 11월 08-09 | Sung-Hwan Kim, Sang-Young Kim, Tao Shen, Keon-Tae Park, Ik-Hyun Kim, Jae-Mean Koo, Chang-Sung Seok, "Fracture Toughness of SA 508 GR.1A Nuclear Piping Using compact Tension(CT) and Large Curved CT Specimen", International Conference on Advaces in Mechanical, Production and Industrial Engineering | |
| 11월 08-09 | Sang-Young Kim, Jae-Mean Koo, Chang-Sung Seok, "Failure Strength of CFRP Composite Structure with Open Hole under Tensile Loading", International Conference on Advaces in Mechanical, Production and Industrial Engineering |
 |
1월 26-28 |
이동근, 신인환, 김용석, 구재민, 석창성, "A Study on Optimization of DVC Type Thermal Barrier Coatings Applied to Gas Turbine Blade", 2013 International Congress on Engineering and Information
|
| 1월 26-28 | 김용석, 이호틈, 구재민, 석창성, 정흥채, 이기원, 권삼영, "A Study on Development of Fatigue Tester Simulating Operating Condition for the Dropper of Overhead Catenary System", 2013 International Congress on Engineering and Information | |
| 1월 26-28 | 홍석우, 안상수, 강정훈, 장인철, 구재민, 석창성, "A study on Bonding Strength and Fatigue Life of Caulking Part of Washing Machine", 2013 International Congress on Engineering and Information | |
| 1월 26-28 | 신인환, 석창성, 구재민, 양성호, "Estimation of Mechanical Properties of Thermal Barrier Coating measured by Nano-Indentation", 2013 International Congress on Engineering and Information | |
| 3월 15-17 | 이동근, 이시영, 구재민, 석창성, "A Study on LCF Characteristics of Ni-base Superalloy IN738LC", The 2nd International Conference on Engineering and Applied Science | |
| 3월 15-17 |
김익현, 유상수, 구재민, 석창성, "A Study on the Evaluation of the Fracture Toughness Characteristic Using the Curved CT Specimen", The 2nd International Conference on Engineering and Applied Science |
|
| 3월 15-17 |
박건태, 박수, 구재민, 석창성, "Measurement of the Fracture Toughness for Nuclear Piping Using the Compact Pipe Specimen", The 2nd International Conference on Engineering and Applied Science |
|
| 6월 09-13 |
In Hwan Shin, Chang Sung Seok, Jae Mean Koo, Sang Hun Kim, Tack Woon Lee and Dae Jin Kim, "Evaluation of Thermal Fatigue Life of Thermal Barrier Coating with High-Density Vertical Cracks using the Low Power Method", The 9th International Conference on Fracture & Strength of Solids |
|
| 6월 09-13 | Dongkeun Lee, Siyoung Lee, To Kang, Jea-Mean Koo, Chang-sung Seok, Sung-Jin Song, "A Study on Creep Characteristics of Ni-base Superalloy IN738LC", The 9th International Conference on Fracture & Strength of Solids | |
| 6월 09-13 |
Suk Woo Hong, Jae Mean Koo, Chang Sung Seok, "Degradation Characteristics of CFRP Composites by Long-Term Exposure under High-Temperature and High-Humidity Environment", The 9th International Conference on Fracture & Strength of Solids |
|
| 6월 09-13 | Yongseok Kim, Li Haochuang, Chang-Sung Seok, Jae-Mean Koo, Kiwon Lee, Sam-Young Kwon, "Fatigue Life Prediction Method for Contact Wire Using Maximum Local Stress", The 9th International Conference on Fracture & Strength of Solids | |
| 6월 09-13 | Keontae Park, Ikhyun Kim, Jae-Mean Koo, Chang-Sung Seok, "Effect of Test Jig on Stress Intensity Factor Of Tension Compact Pipe Specimen", The 9th International Conference on Fracture & Strength of Solids | |
| 6월 25-29 | Suk Woo Hong, Jae Mean Koo, Chang Sung Seok, "An Estimation of Fatigue Life and Prediction of Caulking Press Joining", International Symposium on Green Manufacturing and Applications 2013 | |
| 6월 25-29 | Yongseok Kim, Li Haochuang, Chang-Sung Seok, Jae-Mean Koo, Kiwon Lee, Sam-Young Kwon, "Development of Thermal Gradiant Prediction Method for Thermal Barrier Coating", International Symposium on Green Manufacturing and Applications 2013 | |
| 6월 25-29 | Keontae Park, Ikhyun Kim, Jea-Mean Koo, Chang-Sung Seok, "Evaluation for Fracture Resistance Curve and Test Jig of the Compact Pipe Specimen", International Symposium on Green Manufacturing and Applications 2013 | |
| 10월 27-28 | Sunghuk Kim, Jae Mean Koo, Chang Sung Seok, "Evaluation of Influence of Cracks on DVC Coating Using Finite Element Analysis", 2013 International Conference on Materials Science and Mechanical Engineering | |
| 10월 27-28 | Jeong-Min Lee, Dongkeun Lee, Jae-Mean Koo, Chang-Sung Seok, "Evaluation on Thermo-Menchanical Fatigue Life of IN738LC Using Finite Element Analysis", 2013 International Conference on Materials Science and Mechanical Engineering | |
| 10월 27-28 | Hyunwoo Song, Yongseok Kim, Jae-Mean Koo, Chang-Sung Seok, "Durability Evaluation of Thermal Barrier Coating (TBC) at High Temperature", 2013 International Conference on Materials Science and Mechanical Engineering |
 |
1월 22-25 |
In Hwan Shin, Dong Keun Lee, Yong Seok Kim, Jae Mean Koo, Chang Sung Seok, Tack Woon Lee, "Assessment of the Characteristic of Thermal Barrier Coating applied to Gas Turbine Blade by Thermo Gradient Mechanical Fatigue Test", 6th international Conference on Creep, Fatigue, and Creep-Fatigue Interaction (CF-6)
|
| 1월 22-25 | Dong. Keun. Lee, In. Hwan. Shin, Yong Seok Kim, Jae. Mean. Koo, Chang. Sung. Seok, "A study on fatigue life prediction of Ni-base superalloy", 6th international Conference on Creep, Fatigue, and Creep-Fatigue Interaction (CF-6) | |
| 1월 22-25 | Yongseok Kim, Dong-Keun Lee, In-Hwan Shin, Jae-Mean Koo, Chang-Sung Seok, "Micro-Structural Analysis of TMF Failure Mechanism of GTD-111 Applied to Gas Turbine Blades", 6th international Conference on Creep, Fatigue, and Creep-Fatigue Interaction (CF-6) | |
| 1월 22-25 | Suk-Woo Hong, Sang-Soo Ahn, Jae-Mean Koo, Chang-Sung Seok, "Effects of high Temperature and Humidity o the Mechanical Strength of CFRP Composites", 6th international Conference on Creep, Fatigue, and Creep-Fatigue Interaction (CF-6) | |
| 5월 13-16 | S.S. Ahn, S.R.Kim, S.W.Hong, K.D.Sung, J.M.Koo, C.S.Seok, "Evaluation of Fatigue Properties of Hyperelastic Material under High Temperature", Asia Pacific Conference on Fracture and Strength - Mechanics and Materials(APCFS-MM) | |
| 5월 13-16 | H.C.Li, Y.S.Kim, J.M.Koo, C.S.Seok, K.W.Lee, S.Y.Kwon, "The Evaluation for Fatigue Life of Trolley Line Struture by Uniaxial Tension Fatigue Test", Asia Pacific Conference on Fracture and Strength - Mechanics and Materials(APCFS-MM) | |
| 5월 21-24 | S. R. Kim, H. S. Park, S. S. Ahn, K. D. Sung, C. S. Seok, Y. G. Kang, "A DEVELOPMENT OF PREDICTION METHOD FOR FAILURE LIFE DUE TO ECE R30 HIGH SPEED TEST", International Rubber Conference 2012(IRC2012) | |
| 8월 27-29 |
Sang Soo Ahn, Suk Woo Hong, Jae Mean Koo and Chang Sung Seok, "A Study on the Compressive Strength of Composite Structures with Hole Notch", International Symposium on Green Manufacturing and Applications 2012 |
|
| 8월 27-29 | DongKeun Lee, Si-Young Lee, Young-Jun Hong, Jae Mean Koo and ChangSung Seok, "Development of Speed Limit Safety Wheel", International Symposium on Green Manufacturing and Applications 2012 | |
| 9월 16-21 | D.K. Lee, I.H. Shin, Y.S. Kim, S.Y. Lee, J.M. Koo, C.S. Seok, "A Study on thermo mechanical fatigue life prediction of Ni-base superalloy", International Conference on Fatigue Damage of Structural Materials IX | |
| 9월 16-21 | Y.S. Kim, S.S. Ahn, M.S. Kang, J.M. Koo, K.W. Lee, C.S. Seok, "A study on the fatigue fracture mechanism of railway contact wires", International Conference on Fatigue Damage of Structural Materials IX |
 |
7월 3-8 |
Min Sung Kang, Dong-Keun Lee, Jae-Mean Koo, Chang-Sung Seok, "Estimation of the aging of plasma sprayed thermal barrier coating by indentation method, Fourth International Indentation Workshop (IIW4), Seoul nuiv.Korea, July, 3-8, 2011
|
| 7월 3-8 | In-Whan Shin Dong-Keun Lee, Jae-Mean Koo, Chang-Sung Seok , "Mechanical properties of thermal barrier coating measured by nano-indentation, Seoul nuiv.Korea, July, 3-8, 2011 | |
| 7월 15-18 | Hong-Sun Park, Jung-Hun Choi, Min-Sung Kang, Jae Mean Koo, and Chang Sung Seok, "Evaluation of Fatigue Life for Plain Woven Composite Materials using Accumulative Damage Assessment", The 6th International Conference on Advanced Materials, Development and Performance(AMDP2011) | |
| 11월 20-22 | D.J. Kim, J. Tsang, W.J. Yang, J.H. Lee, D.Y. Seo, H. Saari, and C.S. Seok, "The Crack Growth Behavior of Incoloy 800H under Fatigue and Creep-Fatigue Conditions at Elevated Temperature", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | D.Y. Seo, T. Sawatzky, H. Saari, D.J. Kim, P. Au, and C.S. Seok, "The Effect of Microstructure on Creep Behavior of a Powder Metallurgy (PM) Beta Gamma Alloy", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | In Hwan Shin, Dong Keun Lee, Yong Seok Kim, Jae Mean Koo, Chang Sung Seok, and Tack Woon Lee, "Failure Mechanism of Gas Turbine Blade applied Thermal Barrier Coating by Thermo-Mechanical Fatigue Test", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | Sang-Young Kim, Dae-Wook Kim, Jae-Mean Koo, and Chang-Sung Seok, "A Study of Failure Criterion for Plain Woven CFRP Composites Structure having a Hole Notch", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | H.I. Kim, H.S. Park, J.M. Koo, C.S. Seok, S.H. Yang, M.Y. Kim, "Evaluation of Welding Characteristics for Manual Overlay and Laser Cladding Materials in Gas Turbine Blades", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | J.H. Choi, M.S. Kang, J. M. Koo, and C. S. Seok, "A Study on Prediction of Residual Strength after impact in Aircraft Composites Structure", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | M. S. Kang, S. W. Hong, S. S. Ahan, J. M. Koo, and C. S. Seok, "Evaluation of the Fatigue life according to an Environmental Temperature of Impacted CFRP Composite material", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | H.S. Park, H.I. Kim, J.M. Koo, C.S. Seok, S.H. Yang, M.Y. Kim, "Microstructural Investigation of GTD 111DS Materials in the Heat Treatment Conditions", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | Dong. Keun. Lee, In. Hwan. Shin, Yongseok Kim, Jae. Mean. Koo, Chang. Sung. Seok, and Tack. Woon. Lee, "Estimation of Characteristics of Thermal Barrier Coatings Applied to Gas Turbine Blade", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | Yongseok Kim, Jae-Mean Koo, In-Hwan Shin, Dong-Geun Lee, Tack-Woon Lee, and Chang-Sung Seok, "Effects of Coating on TMF Life of GTD-111 Applied to Gas Turbine Blades" International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | H. S. Park, M. S. Kang, J. H. Choi, J. M. Koo, and C. S. Seok, "Evaluation of Fatigue Life for Composite Materials using Evaluation of Accumulative Damage", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | Sang-Young Kim, Dae-Wook Kim, Min-Sung Kang, Jae-Mean Koo, and Chang-Sung Seok, "A Study on Variation of Residual Strength of Carbon Fiber Reinforced Plastic Composites with a Hole under Tensile Fatigue Loading", International Conference on Materials and Reliability 2011 | |
| 11월 20-22 | S. Park, H. H. Kwon, J. M. Koo, C. S. Seok, "A Study Fracture Toughness of Nuclear Piping using Real Pipe Specimens and Small Specimens", International Conference on Materials and Reliability 2011 | |
| 12월 16-18 | Haochuang Li, Kwang-Hyeon Lee, Jae-Mean Koo,Chang-Sung Seok, "A Research On Static And Dynamic Fracture-Resistance Of Welding Parts Of Coolant Piping", International Conference on Advanced in Materials and Manufacturing Process (ICAMMP 2011) |
 |
7월 4-10 |
J.H. Choi, M.S. Kang, H.S. Park, J.M. Koo, C.S. Seok , "A study on the Prediction Model of Residual Strength after impact in Aircraft Composites, The Eighteenth Annual International Conference on Composite/Nano Engineering (ICCE-18), Ancorage, USA, July, 4-10, 2010
|
| 7월 4-10 |
H.S. Park, M.S. Kang, J.H. Choi, J.M. Koo, C.S. Seok , "Fatigue life Prediction of Woven CFRP, The Eighteenth Annual International Conference on Composite/Nano Engineering (ICCE-18), Ancorage, USA, July, 4-10, 2010
|
|
| 7월 4-10 |
S.Y. Kim, M.S. Kang, J.M. Koo, C.S. Seok , "Evaluation of Residual Strength of Hole-Notched Plain Woven CFRP Composite under Fatigue, The Eighteenth Annual International Conference on Composite/Nano Engineering (ICCE-18), Ancorage, USA, July, 4-10, 2010
|
|
| 7월 4-10 |
M.S. Kang, J.H. Choi, S.Y. Kim, J.M. Koo, C.S. Seok, "Strength Characteristics of CFRP Composites with Impact Damage, The Eighteenth Annual International Conference on Composite/Nano Engineering (ICCE-18), Ancorage, USA, July, 4-10, 2010
|
|
| 7월 18-22 |
Jung-hun Choi, Il-hwan Kim, Jae-Mean Koo, Chang-Sung Seok, "A study on Behavior of Mixed Mode Fatigue Crack Growth of Spiral Welding Part under Bending Load, ASME 2010 Pressure Vessel & Piping Conference, Bellevue, USA, July, 18-22, 2010
|
|
| 7월 18-22 |
S. Park, S.S. Yoo, J.K. Min, J.M. Koo, C.S. Seok, "A Study on Fracture toughness of nuclear piping material by various types of specimen, ASME 2010 Pressure Vessel & Piping Conference, Bellevue, USA, July, 18-22, 2010
|
|
| 9월 13-17 |
I.H.Shin, D.K.Lee, I.H.Kim, C.S.Seok, J.M.Koo, T.W.Lee, B.S.Kim, "Assessment of Thermo-Mechanical Fatigue Life of Thermal Barrier Coatings Applied to Gas Turbine Blade, 13th International Conference on Plasma Surface Engineering (PSE 2010), garmisch-Partenkirchen, Germany, Sep, 13-17, 2010
|
|
| 9월 13-17 |
Il Hwan Kim, In Hwan Shin, Dong Keun Lee, Chang Sung Seok, Jae Mean Koo, Tack Woon Lee and Bum Soo Kim, "Estimation of Spallation Life of Thermal Barrier Coating of Gas Turbine Blade by Thermal Fatigue Test, 13th International Conference on Plasma Surface Engineering (PSE 2010), garmisch-Partenkirchen, Germany, Sep, 13-17, 2010
|
|
|
9월 27 - 10월 01 |
Jong-hyun Baek, and Chang-sung Seok, "PLASTIC COLLAPSE OF API 5L X65 PIPE HAVING DENT DEFECTS UNDER INTERNAL PRESSURE AND BENDING LOAD, The 8th International Pipeline Conference (IPC2010), Calgary, Alberta, Canada, Sep, 27-Oct, 1, 2010 |
 |
11월 8-13 |
I.W. Shin, D.J. Kim, J.M. Koo, C.S. Seok, "Prediction on the delamination Life of Thermal Barrier Coating (TBC) for Gas Turbine Blade by Cyclic Oxidation, The 13th Asia-Pacific Conference on Non-Destructive Testing(APCNDT2009), Yokohama, Japan, Nov, 8-13, 2009
|
| 9월 20-25 |
D.J. Kim, J.M. Koo, C.S. Seok, "Failure mechanisms of plasma-sprayed thermal barrier coatings with thermal fatigue, Asian-European International Conference on Plasma Surface Engineering(AEPSE 2009), Bexco, Pusan, Sep, 20-25, 2009
|
|
| 9월 20-25 |
I.W. Shin, J.M. Koo, C.S. Seok, "Spallation life estimation of plasma-sprayed thermal barrier coatings by bond test, Asian-European International Conference on Plasma Surface Engineering(AEPSE 2009), Bexco, Pusan, Sep, 20-25, 2009
|
|
| 9월 20-23 |
S. P, Y. Huh, J.H. Choi, J.M. Koo, C.S. Seok, J.S. Park , "A STUDY ON THE ESTIMATION OF THE FRACTURE RESISTANCE CURVE FOR NUCLEAR PIPING, International Conference on Pressure Vessel Technology(ICPVT-12), Jeju, Korea, Sep, 20-23, 2009
|
|
| 9월 20-23 |
K.C. Han, I.H. Shin, D.H. Cho, C.S. Seok, Y.Z. Lee , "Delamination Life of Thermal Barrier Coating for Gas Turbine Blade with Thermal Fatigue, International Conference on Pressure Vessel Technology(ICPVT-12), Jeju, Korea, Sep, 20-23, 2009
|
|
| 9월 20-23 |
Y. Huh, J.H. Choi, J.M. Koo, C.S. Seok , "Influence of the strength mismatch of a narrow gap welded joint on the plastic 이타 factor, International Conference on Pressure Vessel Technology(ICPVT-12), Jeju, Korea, Sep, 20-23, 2009
|
|
| 9월 20-23 |
Y. Huh, H.S. Park, J.M. Koo, C.S. Seok , "Evaluation of the plastic 이타 factor by considering the crack location in a narrow gap welding part, International Conference on Pressure Vessel Technology(ICPVT-12), Jeju, Korea, Sep, 20-23, 2009
|
|
| 2월 15~19 |
Indrajit Charit, Chang-Sung Seok, K. Murty, "Effects of Dynamic Strain Aging and Cyclic Loading on Fracture Behavior of A516 Grade 70 and Other Steels, 2009 TMS Annual Meeting & Exhibition, San Francisco, CA, USA, feb,15-19, 2009
|
|
| 1월 20~22. |
J.H. Choi, H. S. Park, S.-Y. Kim, H. Yong, J.M. Koo, C.S. Seok," Evaluation of fracture toughness of plain woven CFRP composite material according to the fiber array direction, Seventh Iinternational Conference on Composite Science and Technology , Sharjah, UAE, Jan, 20-22, 2009
|
|
| 1월 20~22. |
H-S. Park, J-H. Choi, J-M. Koo, C.S. Seok, "Evaluation of fracture toughness in woven fabric carbon fiber reinforced polymer composite by the generalized locus method, Seventh Iinternational Conference on Composite Science and Technology , Sharjah, UAE, Jan, 20-22, 2009
|
 |
10월 13~15 |
Dae-Jin Kim, In-Whan Shin, Jae-Mean Koo, Chang-Sung Seok, Mun-Young Kim, "Al depletion in the MCrAlY bond coat according to the isothermal oxidation, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008),p. 187, Beijing, China, Oct, 13-15, 2008
|
| 10월 13~15 |
Soo Park, Kwang-Sang Seon, Dae-Jin Kim, Min-Sung Kang, Jae-Mean Koo, Chang-Sung Seok, ":The Determinating Method of Ramberg-Osgood Constant using Reference Curve, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), pp. 132-133, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Yong Huh, Sung-Keun Cho, Hyung-Ick Kim, Jae-Mean Koo, Chang-Sung Seok,":The Evaluation of the Fracture Toughness for the Pipe Specimen Using the Image Processing Method, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), p. 114, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Sung-Keun Cho, Kwang-Hyeon Lee, Jung-Hoon Choi, Hong-Sun Park, Jae-Mean Koo, Chang-Sung Seok, ":The Estimation of Fracture Resistance Curve for Nuclear Piping, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), pp. 113-114, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Jung-Hun Choi , Min-Sung Kang, Hyung-Ick Kim, Sung-Keun Cho, Jae-Mean Koo, Chang-Sung Seok, ":Fatigue crack propagation behavior according to fiber arraying direction for load direction in woven CFRP composite, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), p. 104, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Jong-Hyun Baek, Young-Pyo Kim, Choel-Man Kim, Woo-Sik Kim, Jung-Hun Choi, Chang-Sung Seok ,":Elastic?Plastic Response on Pressurizing of Dented Pipelines, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), p. 104, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Kwang-Hyeon Lee, Sung-Keun Cho, Hyung-Ick Kim, Yong Huh, Jae-Mean Koo, Chang-Sung Seok, ":Comparison of Static and Dynamic Strength and J-R Curves of Two Piping Materials by Various Crack Measure Method , International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), p. 101, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15. |
Hyung-Ick Kim, Hong-Sun Park, Yong Huh, Jae-Mean Koo, Chang-Sung Seok, Sung-Ho Yang, Moon-Young Kim, ":A Study on the Recovery of Mechanical Property for Superalloy using Laser Cladding and Heat Treatment, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), pp. 98-99, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Hong-Sun Park, Hyung-Ick Kim, Yong Huh, Jae-Mean Koo, Chang-Sung Seok, Sung-Ho Yang, Moon-Young Kim , ":A Study on the Integrity Recovery of Gas Turbine Blade Material for Overlay Welding and Heat Treatment, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), p. 98, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Sang-Young Kim, Jun-Hun Choi, Hyung-Ick Kim, Yong Huh, Jae-Mean Koo, Chang-Sung Seok, ":Study of fatigue crack propagation of woven ply CFRP Laminates subject to directional pin load in hole, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), p. 93, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 13~15 |
Min-Sung Kang, Hong-Sun Park, Soo Park, Jae-Mean Koo, Chang-Sung Seok, "Fracture Toughness and Residual Strength according to Load Direction in Plain Woven CFRP, International Conference on Advanced Materials, Development and Performance 2008(AMDP2008), p. 92, Beijing, China, Oct, 13-15, 2008
|
|
| 10월 5~9. | Sang-Young Kim, Jae-Mean Koo, Chang-Sung Seok, "Analysis of Fatigue Test Results of U-shaped Copper Pipe by Considering Residual Stress, Materials Science & Technology 2008 Conference(MS&T'08),p.242-243, Pittsburgh, PA USA,Oct 5-9, 2008 | |
| 10월 5~9. |
Min-Sung Kang, Sang-Young Kim, Jae-Mean Koo, Chang-Sung Seok, "Study on Residual Stress Measurement of Aluminum Pipe using Raman Spectroscopy,Materials Science & Technology 2008 Conference(MS&T'08),p.242, Pittsburgh, PA USA,Oct 5-9, 2008
|
|
| 10월 5~9. |
Sang-Young Kim, Jun-Hun Choi, Woo-Hyung Lee, Min-Sung Kang, Jae-Mean Koo, Chang-Sung Seok, "A Study on Failure Strength of Woven CFRP Composite Plate with Hole Subject to Remote Load,Materials Science & Technology 2008 Conference(MS&T'08),p.32, Pittsburgh, PA USA,Oct 5-9, 2008
|
|
| 10월 5~9. |
Min-Sung Kang, Hyung-Ick Kim, Sang-Young Kim, Jae-Mean Koo, Chang-Sung Seok, "Effect of Load Direction on Plain Woven CFRP in Fracture Toughness Evaluation,Materials Science & Technology 2008 Conference(MS&T'08),p.31 , Pittsburgh, PA USA, Oct 5-9, 2008
|
|
| 9월 25~27. |
Dae-Jin Kim, Sung-Keun Cho, Jung-Hoon Choi, Jae-Mean Koo, Chang-Sung Seok, Mun Young Kim, "Evaluation of the Degradation of Plasma Sprayed Thermal Barrier Coatings using Nano-Indentation, 2nd International Conference on Nanoscale Materials and Engineering(ICNME 2008),Dalina, China, Sep 25-27, 2008
|
|
| 9월 14~19. | Sung Keun Cho, Dae Jin Kim, Woo Taek We, Jae Mean Koo, Chang Sung Seok, "Fatigue life assessment for brake disk of railway vehicles by surface hardness,International Conference on Fatigue Damage of Structural Materilas VII,Hyannis, MA, USA, Sep 14-19. , 2008 |
 |
10월 31 ~11월 5. |
Sung Keun Cho, Dae Jin Kim, Jung Hoon Choi, Young Min Lee, Chang Sung Seok, "Fatigue life evaluation of disk brake of railway vehicle considering pressure distribution at frictional surface;,Fracture Mechanics 2007, Integrated Approaches for Materials and Structural Safety, pp. 119-124, Changsha, China, Oct. 31-Nov. 5, 2007 |
|
10월 31 ~11월 5. |
Dae Jin Kim, Sung Keun Cho, Jung Hoon Choi, Jae Mean Koo, Chang Sung Seok, Jung Won Seo, "Low Cycle fatigue characteristics of two steels for railway wheel and axle;,Fracture Mechanics 2007, Integrated Approaches for Materials and Structural Safety, pp. 113-118, Changsha, China, Oct. 31-Nov. 5, 2007 | |
|
10월 31 ~11월 5. |
Jung Hoon Choi, Sung Keun Cho, Dae Jin Kim, Jae Mean Koo, Chang Sung Seok, Won Keun Song, "Prediction of fatigue life characteristics of real waterwork pipe using linear transformation by the probability density function;,Fracture Mechanics 2007, Integrated Approaches for Materials and Structural Safety, pp. 63-68, Changsha, China, Oct. 31-Nov. 5, 2007 | |
| 10월 17~19. | Ki won Lee, Yong Hyeon Cho, Samyoung Kwon, Chang Sung Seok, "Bending fatigue behaviors of a galvanized steel stranded wire under the practical conditions;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 311, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Dae-Jin Kim, Woo-Taek Wee, Jae-Mean Koo, Chang-Sung Seok, "Fatigue life assessment for brake disk of railway vehicle;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 310, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Ki won Lee, Yong Hyeon Cho, Young Park, Chang Sung Seok, "The effect of the residual stress in a galvanized steel stranded wire during the strand process;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 259, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Yong Huh, Sung Keun Cho, Hyung Ick Kim, Jae Mean Koo, Chang Sung Seok, "Plastic η-factor for fracture toughness test of the HAZ in SA508Cl.1a narrow-gap welding part;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 242, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Jung Hun Choi, Sung Keun Cho, Jae Mean Koo, Chang Sung Seok, "A Study on the Thermal Shock Behavior of Aluminum Coating Layer with Curvature;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 38, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Hyung Ick Kim, Hong Sun Park, Yong Huh, Jae Mean Koo, Sung Ho Yang, Moon Young Kim, Chang Sung Seok, "Welding Characteristic Evaluation of Manual Overlaying and Laser Cladding for the gas turbine blade;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 261, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Jong Hyun Baek, Young Pyo Kim, Woo Sik Kim, Chang Sung SeoK, "Failure Assessment Analysis to API 5L X65 Pipeline Subjected to Large Plastic Deformation;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 159, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Sung Keun Cho, Jung Hun Choi, Sang Yoel Park, Moon Young Kim, Jae Mean Koo, Chang Sung Seok, "Evaluation of life for a cracked gas turbine;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 34, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Sang Young Kim, Jae Mean Koo, Chang Sung Seok, "Evaluation of residual stress of U-shaped copper pipe by Raman Spectroscopy;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 291, Busan, Korea, Oct, 17 -19, 2007 | |
| 10월 17~19. | Hong Sun Park, Yong Huh, Hyung Ick Kim, Jae Mean Koo, Chang Sung Seok, "Nondestructive Determination of Tensile Properties and Fracture Toughness of SM 490A;,The 2nd International Conference on Advanced Nondestructive Evaluation, pp. 261, Busan, Korea, Oct, 17 -19, 2007 | |
| 8월 12~17. | C.S. Seok, B. Marple, G. Srikant, I. Charit, K.L. Murty, "High Temperature Deformation Characteristics of Zirlo Tubing via Ring Creep and Burst Tests;,19th International Conference on Structural Mechanics in Reactor Technology, Toronto, Canada, Aug, 12-17, 2007 | |
| 5월 27~31. | JYoon-Suk Chang, Jong-Min Kim, Chang-Sung Seok, Jae-Boong Choi, Young-Jin Kim, "Assessment of In-plane Size Effect for Nuclear Carbon Steels Using Damage Models;,The 10th International Conference on Mechanical Behavior of Materials, Busan, Korea, May 27- 31, 2007 | |
| 5월 27~31. | Jong-hyun Baek, Cheol-man Kim, Young-pyo Kim and Chang-sung SeoK, "Structural Integrity Evaluation of API 5L X65 Pipe Subjected to Pre-strain up to Tensile Strain using the API 579 Procedure",The 10th International Conference on Mechanical Behavior of Materials, Busan, Korea, May 27- 31, 2007 |
 |
11월 22~25. | Jung-Hun Choi , Jong-Hyun Baek , Chang-Sung Seok, "Measurement of residual stress in water pipe welds using the Hole-Drilling Technique",Asian Pacific Conference on Fracture and Strength '06, Sanya of Hainan Island, China, Nov., 22 - 25, 2006 |
| 11월 22~25. | Hong-Sun Park, Hyung-Ick Kim, Yong Huh, Moon-Young Kim, Sang-Yeol Park, Jae-Mean Koo, Chang-Sung Seok, "A Study on the Degradation of the Superalloy Inconel 718 using Ultrasonic Technique",Asian Pacific Conference on Fracture and Strength '06, Sanya of Hainan Island, China, Nov., 22 - 25, 2006 | |
| 11월 22~25. | Hyung-Ick Kim, Hong-Sun Park, Jae-Mean Koo, Sung-Ho Yang, Moon-Young Kim, Chang-Sung Seok, "Welding Characteristic Evaluation of GMAW and Laser Cladding for the Gas Turbine 1st Blade",Asian Pacific Conference on Fracture and Strength '06, Sanya of Hainan Island, China, Nov., 22 - 25, 2006 | |
| 11월 22~25. | Seung Baek, Se-June Park, Kwang-Real Lee, Jae-Mean Koo, Chang-Sung Seok, Chang-Sung Seok, "Investigation of Mechanical Stability of Thermally Aged a-c:H DLC Films with Different Precursor Gases",Asian Pacific Conference on Fracture and Strength '06, Sanya of Hainan Island, China, Nov., 22 - 25, 2006 | |
| 11월 22~25. | Sung-Keun Cho, Jung-Hun Choi, Young-Min Lee, Jae-Mean Koo, Chang-Sung Seok, "Life Evaluation of a Disk Brake of Railway Vehicles considering Pressure Distributions at a Frictional Surface",Asian Pacific Conference on Fracture and Strength '06, Sanya of Hainan Island, China, Nov., 22 - 25, 2006 | |
| 11월 22~25. | Yong Huh, Sung-Keun Cho, Hyung-Ick Kim, Hong-sun Park, Jae-Mean Koo, Chang-Sung Seok, "Plastic η-factor for the fracture toughness test of the SA508Cl.1a narrow-gap welding part",Asian Pacific Conference on Fracture and Strength '06, Sanya of Hainan Island, China, Nov., 22 - 25, 2006 | |
| 10월 30. | Chang-Sung Seok and Jae-Mean Koo, "Degradation Evaluation Method of 1Cr-1Mo-0.25V Steel",International Symposium on Advanced Modeling and Processing of Materials 2006, pp. 77-90, Cheongju, Korea, Oct. 30, 2006 | |
| 9월 26~29. | Jong-hyun Baek, young-pyo Kim, Woosik Kim, and chang-sung Seok, "An Experimental Study on the Pre-strain Effect of API 5L X65 Pipeline for Natural Gas Transmission",International Conference Experimental Mechanics 2006, pp. 1063-1066, Jeju, Korea, Sep., 26-29, 2006 | |
| 9월 26~29. | Y.S. chang, T.R. Lee, J.B.Choi, C.S. Seok, and Y.J. Kim, "Quantification of Crack Length and Thickness Effects on J-R Curves by Ductile Damage",International Conference Experimental Mechanics 2006, pp. 935-938, Jeju, Korea, Sep., 26-29, 2006 | |
| 9월 26~29. | Hyung-Ick Kim, Yong Huh, Jeong-Pyo Kim, and Chang-Sung Seok, "A study on the Nondestructive Evaluation of Material Degradation",International Conference Experimental Mechanics 2006, pp. 685-688, Jeju, Korea, Sep., 26-29, 2006 | |
| 9월 25~29. | Jong-hyun Baek, Young-pyo Kim, Woo-sik Kim, Chang-kyun Oh, Yun-jae Kim, Chang-sung Seok, "An Experimental and Analytical Investigation into The 3D Hot Bend of API 5L X65 Pipeline", 6th International Pipelin Conference, Calgary, Alberta, Canada, Sep., 25-29, 2006 | |
| 6월 4~9. | Woo-Taek We, Seung Baek,Chang-Sung Seok, "Film Thickness Dependent Fracture Characteristic of DLC on Silicon by Using Nano-indentation Fracture", 14th International Conference on the Strength of Materials, pp. 239, Xi’an, P. R. China, June, 4-9, 2006 | |
| 6월 4~9. | Young-Min Lee, Dae-Jin Kim, Jae-Sil Park, Chang-Sung Seok, "Thermal Stress Analysis for a Disk Brake of Railway Vehicles considering Pressure Distributions at a Frictional Surface", 14th International Conference on the Strength of Materials, pp. 287, Xi’an, P. R. China, June, 4-9, 2006 | |
| 6월 4~9. | Yong Huh, Hyung-Ick Kim, Sung-Keun Cho and Chang-Sung Seok, "Evaluation of Fracture toughness for SA508Cl.1a narrow-gap welding part", 14th International Conference on the Strength of Materials, pp. 176, Xi’an, P. R. China, June, 4-9, 2006 | |
| 6월 4~9. | Bong-Kook Bae, Sung-Keun Cho, and Chang-Sung Seok, "A Study on the Ring Tensile Specimens", 14th International Conference on the Strength of Materials, pp. 90, Xi’an, P. R. China, June, 4-9, 2006 | |
| 6월 4~9. | Seung Baek, Chang-Sung Seok, Se-June Park, Kwang-Reol Lee, "Investigation of Fracture Characteristic in Thermally Aged DLC Thin Films", 14th International Conference on the Strength of Materials, pp. 86, Xi’an, P. R. China, June, 4-9, 2006 | |
| 6월 4~9. | Hong-Sun Park, Hyung-Ick Kim, Jae-Mean Koo, Chang-Sung Seok, "Measurement of Micro-Mechanical properties for Gas Turbine Blades", 14th International Conference on the Strength of Materials, pp. 193, Xi’an, P. R. China, June, 4-9, 2006 | |
| 6월 4~9. | Sang-Young Kim, Seung Baek, Chang-Sung Seok, Jae-Kwan Lee, Jin-Yong Mo and Deug-Yong Park, "Evaluation of residual stress of copper pipe by using Raman Spectroscopy", 14th International Conference on the Strength of Materials, pp. 188, Xi’an, P. R. China, June, 4-9, 2006 |
 |
12월 9. | Hyung-Ick Kim, Yong Huh, Chang-Sung Seok, and Jin-Yong Mo, "Fatigue life evaluation of an actual structure under the irregular loading using an acceleration test;, The International Symposium on Safety, Reliability and Structural Integrity, Jeju Ramada hotel, Jeju, Dec., 9, 2005 |
| 11월 7~9. | Chang-Sung Seok, Young-Min Lee, Yong Huh, Jae-Sil Park, "The influence of microstructure and chemical composition on the strength of cast iron used for railway vehicles", The 1st Advanced Nondestructive Evaluation 2005, pp. 313, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | Kiwon Lee, Young Park, Yong-Hyeon Cho, Seung Baek and Chang-Sung Seok, "A study on creep behavior of pure copper associated with stress change at room temperature", The 1st Advanced Nondestructive Evaluation 2005, pp. 311, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | Seung Baek, Jae-Mean Koo, Se-Jun Park, and Chang-Sung Seok, "Fracture characterization of micrometer thick dlc films by nano-indentation testing", The 1st Advanced Nondestructive Evaluation 2005, pp. 285, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | Seung Baek, Jae-Mean Koo, and Chang-Sung Seok, "A correction of geometric error of nano-indenter using atomic force microscope and finite element method", The 1st Advanced Nondestructive Evaluation 2005, pp. 190, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | Hyung-ick Kim, Sang-Young Kim, Chang-Sung Seok, Jae-Kwan Lee, Jin-Yong Mo, and Deuk-Yong Park, "The evaluation of fatigue strength according to diameter and processing level of pipe by copper", The 1st Advanced Nondestructive Evaluation 2005, pp. 173, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | Bong-Kook Bae, Hong-Sun Park, Hyung-Ick Kim, Young-Min Lee, Chang-Sung Seok and Moon-Young Kim, "Evaluation of high temperature characteristics in gas turbine blades", The 1st Advanced Nondestructive Evaluation 2005, pp. 173, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | Bong-Kook Bae, Chang-Sung Seok, Jae-Mean Koo, Hyung-Ick Kim and K. Linga Murty, "Creep rupture studies of zirlo tubing using ring tensile specimen", The 1st Advanced Nondestructive Evaluation 2005, pp. 155, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | C. S. Seok and J. S. Park, "A study on estimation of the pipe fracture characteristics", The 1st Advanced Nondestructive Evaluation 2005, pp. 153, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 11월 7~9. | Hyung-Ick Kim, Yong Huh, Jae-Sil Park and Chang-Sung Seok, "Evaluation of the ductile-brittle transition behaviour by the fracture toughness test using aging specimens", The 1st Advanced Nondestructive Evaluation 2005, pp. 153, Jeju ICC, Jeju, Nov., 7-9, 2005 | |
| 7월 10~13. | Dae-Jin Kim, Chang-Sung Seok and Jae-Min Koo, "Fatigue Strength of the Fillet Welded Cruciform Joints using Hot-spot Stress Approach", Advanced Materials Development & Performance Conference 2005, pp. 216, Auckland, New zealand, July, 10-13, 2005 | |
| 7월 10~13. | Seung Baek, Chang-Sung Seok, Jae-Min Koo, "Fracture Characteristic of Silicon on Insulator using Nano-indentation and Finite Element Analysis", Advanced Materials Development & Performance Conference 2005, pp. 215, Auckland, New zealand, July, 10-13, 2005 | |
| 7월 10~13. | Yong Huh, Jae-Sil Park and Chang-Sung Seok, "Fatigue Characteristic of SM490A Welded Joints", Advanced Materials Development & Performance Conference 2005, pp. 212, Auckland, New zealand, July, 10-13, 2005 | |
| 7월 10~13. | Hyung-Ick Kim, Hong-Sun Park, Chang-Sung Seok and Moon-Young Kim, "The Microstructural Analysis about the FIC Process Effect of the Gas Turbine Blade", Advanced Materials Development & Performance Conference 2005, pp. 211, Auckland, New zealand, July, 10-13, 2005 | |
| 7월 10~13. | Sung-Keun Cho, Chang-Sung Seok, Bong-Kook Bae and Jae-Mean Koo, "Evaluation of the Hoop Properties of a Steam Generator Tube", Advanced Materials Development & Performance Conference 2005, pp. 210, Auckland, New zealand, July, 10-13, 2005 | |
| 7월 10~13. | Jae-Sil Park, Chang-Sung Seok and Jung-Hun Choi, "Evaluation of Fatigue Life Characteristic of Waterworks Pipe Welds using the Probability Density Function", Advanced Materials Development & Performance Conference 2005, pp. 199, Auckland, New zealand, July, 10-13, 2005 | |
| 4월 4~6. | Seung Baek, Chang-Sung Seok, Jae-Min Koo, "Evaluation of the Degradation Characteristics of CF-8A Cast Stainless Steel Using Indentation Techniques and EDS", The 6th international conference on fracture and strength of solids, pp. 865-870, Bali, Indonesia, April, 4-6, 2005 | |
| 4월 4~6. | Seung Baek, Jae-Min Koo, Chang-Sung Seok, "Fracture Characteristic of Single Crystalline Silicon Using Nano-indentation and Finite Element Analysis", The 6th international conference on fracture and strength of solids, pp. 598-603, Bali, Indonesia, April, 4-6, 2005 | |
| 4월 4~6. | Yong huh, Hyung-Ick Kim, Chang-Sung Seok, "Dynamic Fracture Toughness Testing for Welding Part of Nuclear Piping Using Normalization Data Reduction Technique", The 6th international conference on fracture and strength of solids, pp. 72-77, Bali, Indonesia, April, 4-6, 2005 |
 |
10월 6~8. | Bong-Kook Bae, Yong Huh, Jae-Sil Park, Jae-Mean Koo, Chang-Sung Seok, "The Evaluation of Tensile Properties at High Temperatures using Ring Specimen", Asian Pacific Conference on Fracture and Strength '04, Jeju, Korea, Oct, 6-8, 2004 |
| 10월 6~8. | Jae-Sil Park, Hyung-Ick Kim, Yung-Min Lee, Chang-Sung Seok, Woo-Hyun Cho, Won-Keun Song, "Evaluation of Fatigue Characteristic of a Real Waterworks Pipe", Asian Pacific Conference on Fracture and Strength '04, Jeju, Korea, Oct, 6-8, 2004 | |
| 10월 6~8. | Hyung-Ick Kim, Dae-jin Kim, Bong-Kook Bae, Chang-Sung Seok, Sang-Pil Kim, "Evaluation of Ductile-Brittle Transition of Fracture Toughness by Material Degradation", Asian Pacific Conference on Fracture and Strength '04, Jeju, Korea, Oct, 6-8, 2004 | |
| 9월 26~29. | Chang-Sung Seok, Jeong-Pyo Kim, E. S. Park, K. L. Murty, "Nondestructive Characterization of Thermal Aging Effects on Mechanical and Fracture Properties of 1Cr1Mo0.25V Steel Using Ball Indentation", Materials Science & Technology 2004, New orleans, USA, Sep, 26-29, 2004 | |
| 07월 12~14. | Hyung Ick Kim, Dae Jin Kim, Jae Sil Park, Chang Sung Seok, Sang Pil Kim, "Evaluation of the Ductile-Brittle Transition Behaviour by the Fracture Toughness Test using Artificially Degraded Specimens", 1st Engineering Failure Analysis Conference, Lisbon, Portugal, July, 12-14, 2004 | |
| 07월 12~14. | Bong Kook Bae, Jae min Koo, Yung Min Lee, Chang Sung Seok, "The properties of the ring creep and the creep burst of ZIRLO cladding", 1st Engineering Failure Analysis Conference, Lisbon, Portugal, July, 12-14, 2004 | |
| 07월 12~14. | Jae Sil Park, Hyung Ick Kim, Yong Huh, Chang Sung Seok, "Estimation of the fracture resistance curve for a pipe specimen", 1st Engineering Failure Analysis Conference, Lisbon, Portugal, July, 12-14, 2004 | |
| 6월 13~17 | Chang-Sung Seok, Jeong-Pyo Kim, K. L. Murty, "Nondestructive Characterization of Thermal Aging Effects on Mechanical and Fracture Properties of 1Cr1Mo0.25V Steel", 2004 International Congress on Advances in Nuclear Power Plants (ICAPP '04), Embedded International Topical Meeting/2004 ANS Annual Meeting, Pittsburgh, PA USA, June, 13-17, 2004 |
 |
11월 3~7. | Jeong-Pyo Kim, Chang-Sung Seok, Bong-Kook Bae, "Ball Indentation Studies On The Effect Of Aging On Mechanical Behavior Of 1Cr-1Mo-0.25V Steels", 11th Asia-Pacific Conference on Non-destructive Testing, Jeju island, Korea, November, 3-7, 2003 |
| 11월 3~7. | Cheol Kim, Heung Bae Park, Tae Eun Jin, Ill Seok Jeong, Chang sung Seok, "Prediction Of Material Properties Of Cf8M Cast Stainless Steel By Thermal Embrittlement Using Neural Network", 11th Asia-Pacific Conference on Non-destructive Testing, Jeju island, Korea, November, 3-7, 2003 | |
| 11월 3~7. | Chang-Sung Seok, Jeong-Pyo Kim, Bong-Kook Bae, "Evaluation Of Material Degradation Using Electrical Resistivity Methods", 11th Asia-Pacific Conference on Non-destructive Testing, Jeju island, Korea, November, 3-7, 2003 | |
| 11월 3~7. | Jae Sil Park, Chang sung Seok, "Measurement Methods Of The Crack Length For The Real Scale Pipe Specimen", 11th Asia-Pacific Conference on Non-destructive Testing, Jeju island, Korea, November, 3-7, 2003 | |
| 11월 3~7. | Byeong choon Goo, Jae hoon Kim, Jung won Seo, Chang sung Seok, "A Study On The Effect Of Welding Residual Stresses And Weld Bead Profiles On Fatigue Behavior", 11th Asia-Pacific Conference on Non-destructive Testing, Jeju island, Korea, November, 3-7, 2003 | |
| 10월 20~22. | J. P. Kim and C. S. Seok, “A Study on the Evaluation of Material Degradation of 1Cr-1Mo-0.25V Steel using Ultrasonic Technigues”, FEOFS 2003 & Second ICPCF, Tohoku University, Sendai, Japan, October, 20-22, 2003 | |
| 10월 20~22. | J. S. Park and C. S. Seok, "The Evaluation Of The Pipe Fracture Characteristics For SA312 TP304L Stainless Steel", FEOFS 2003 & Second ICPCF, Tohoku University, Sendai, Japan, October, 20-22, 2003 | |
| 7월 8~11. | C. Kim, D. J. Kim, C. S. Seok and W. H. Yang, " Finite Element Analysis of the Residual Stress by Cold Expansion Method under the Influence of Adjacent Holes," Proceedings of the International Conference on Advances in Materials and Processing Technologies 2003, Vol. I, pp. 587-590, Dublin, Republic of Ireland, July, 8-11, 2003 | |
| 7월 3~4. | J. S. Park, Y. J. Kim and C. S. Seok, "The Application of the Load Ratio Method on the Measurement of the Crack Length for the SA312 TP304L Pipe," 29th MPA Workshop 2003, Stuttgart, Germany, July, 3-4, 2003 |
 |
10월 11~12. | C. S. Seok and J. P. Kim, "A Study on the Evaluation of Material Degradation of 1Cr-1Mo-0.25V Steel Using Ultrasonic Techniques", 28th MPA Workshop 2002, Safety and Reliability in Energy Technology, Band 1, Vol. 1, pp. 21.1-21.8, Stuttgart, Germany, October, 10-11, 2002 |
| 4월 14~18. | K. L. Murty and C. S. Seok, "Effects of Dynamic Strain-Aging and Cyclic Loading on Fracture Behavior of Ferritic Steels", 10th International Conference on Nuclear Engineering, pp. 1-6, Arlington, USA, April, 14-18, 2002 |
 |
5월 13~16. | H. K. Yoon, C. S. Seok, S. P. Lee and A. Kohyama, "Evaluation on Fracture Toughness of Low Activation Ferritic Steel (JLF-1)," Proceedings of the 10th International Symposium on Applied Electromagnetics and Mechanics, JSAEM Studies in Applied Electromagnetics and Mechanics, pp. 163-164, Tokyo, Japan, May, 13-16, 2001. |
 |
10월 11~12. | C. S. Seok and S. Y. Kim, "Specimen Size Effect on the Fracture Resistance Curve of Nuclear Piping Materials," 3rd International Workshop on the Integrity of Nuclear Components, Design & Analysis, pp. S2-B3-1-12, Taipei, Taiwan, October 11-12, 2000 |
| 7월 3~4. | C. S. Seok, B. S. Lim, "Ball Indentation Studies on the Effect of Aging on Mechanical Behavior of 1Cr-1Mo-0.25V Steels," MPA-SAFE 1st Joint Workshop, Schtutgart, Germany, July 3-4, pp. 161-180, 2000. | |
| 6월 5~8. | C. S. Seok and S. Y. Kim, "A Study on the Characteristics of Fracture Resistance Curve of Ferritic Steels," Proceedings of the SEM Ⅸ International Congress on Experimental Mechanics, Orlando, Florida, June 5-8, Session 27, pp.191-194, 2000. |
 |
8월 15~20. | C. S. Seok, B. G. Yoon and K. L. Murty, "A Study on the Decrease Phenomenon of Fracture Resistance Value under Reversed Cyclic Loading," 15th International Conference on SMiRT `99, Session G12, Material Ⅲ : Fracture Resistance Evaluation-2, Fracture Mechanics Division G, Vol.5, pp. V-487～V-494, 1999. 8. 15-20. |
| 2월 20. | C. S. Seok, S. Y. Kim, E. S. Park, D. J. Kim, H. N. Ahn, "Fracture Toughness Characteristics of Nuclear Piping Material for Leak-Before-Break Design", The 1999 10th Technical Symposium of the Korean Scientists and Engineers Association (KSEA), Raleigh, North Carolina, Proceedings of 1999 KSEA NC Technical Symposium, pp.44-52, 1999. 2. 20. |
 |
7월 26~30. | S. Y. Kim, J. B. Choi, Y. J. Kim, C. S. Seok, J. S. Yang, "Effect of Specimen Configurations on J-R Curves in Nuclear Piping Material", Fatigue, Fracture and Residual Stress, PVP - Vol. 373, pp. 197-206, ASME, 1998. 7. 26-30. |
| 4월 20~21. | C. S. Seok, Y. J. Kim, J. I. Weon, "Effect of Reverse Cyclic Loading on the Fracture Resistance Curve in C(T) Specimen", 社團法人 日本溶接協會 原子力硏究委員會(The Japan Welding Engineering Society Atomic Energy Reseach Committee), 2nd International Workshop on The Integrity of Nuclear Components, pp. 249-257, 1998. 4. 20-21. |
 |
8월 | Y. S. Jang, C. S. Seok, Y. J. Kim, "Development of a Computer Program for the Prediction of Fracture Resistance Curves", 14th International Conference on SMiRT, Vol. 4, pp. 423-430, France, 1997. 8 |
| 7월 | C. S. Seok, M. W. Suh, Y. J. Kim, J. W. Park, Y. L. Shim, "Investigation of Welding Residual Stress of High Tensile Steel by Finite Element Method and Experiment", Int. J. Press. Ves. & Piping, Vol. 347, No. 2, pp. 115-123, ASME, 1997. 7. |
 |
Y. J. Kim, C. S. Seok, and J. J. Park, "New Creep-Fatigue Damage Model Based on the Frequency Modified Strain Range Method", ASME '96 Pressure Vessels and Piping Conference PVP, Vol. 335, pp. 165-173, 1996. | |
| Y. J. Kim, M. W. Suh, C. S. Seok, H. K. Jun, Y. H. Choi, J. B. Lee, "Development of Expert System for Nuclear Piping Integrity", The ASME Pressure Vessels and Piping Conference, Vol. 323, pp. 207-215, 1996. | ||
| 9월 | J. H. Chung, S. M. Kim, B. K. Bae, C. S. Seok, Y. J. Kim, "Investigation of Friction Characteristics for Rotational Friction System by Acoustic Emission and DC Potential Drop", The Korean Society for Nondestructive Testing, NDT and SAFETY '96 International Workshop, pp. 153-166, 1996. 9 | |
| Y. J. Kim, C. S. Seok, H. K. Jun, I. R. Lee, "Expert System Approach for Nuclear Piping", ASME, PVP Conference, 1996. |
 |
Y. J. Kim, C. S. Seok and Y. S. Choy and Y. S. Chang, "Prediction of Fracture Resistance Curves from Tensile Data", ASME '95 Pressure Vessels and Piping Conference PVP-Vol. 304, pp. 277-295, 1995. | |
| 10월 9~11. | Y. J. Kim, C. S. Seok, Y. S. Chang, "Fracture Properties Evaluation of Stainless Steel Piping for LBB Applications", SFEN, Specialist Meeting on Leak Before Break in Reactor Piping and Vessels, LBB 95, 1995. Octo. 9-11, Lyon, France | |
| Y. J. Kim, C. S. Seok, Y. S. Choy, Y. S. Chang, "Prediction of Fracture Resistance Curves by Finite Element Method", ASME/JSME, PVP Conference, pp. 277-284, 1995. |
 |
Y. J. Kim, C. S. Seok, Y. S. Choy, J. J. Park, "Effect of Thermophysical Properties on Stress Transfer Function for Thermal Fatigue Evaluation", 33rd Annual Conference of Metallurgists of CIM, pp. 163-172, 1994. |
 |
Y. J. Kim, Y. S. Choy, C. S. Seok, K. M. Yang, I. S. Ra, H. Y. Ahn, "Fracture properties Evaluation of BOP Piping System for the Younggwang 3&4 Nuclear Generating Station", Transaction of the 12th Int. conf. on Structural Mechanics in Reactor Technology (SMiRT), pp. 435-440, 1993. | |
| Y. S. Choy, C. S. Seok, "Analysis of the Apparent Negative Crack Growth Phenomenon of J-R Curve", Proceedings of APCFS'93, pp. 631-635, 1993. | ||
| Y. S. Choy, C. S. Seok, "Correction Methods of an Apparent Negative Crack Growth Phenomenon", Proceedings of 1993 ASME PVP conference, Vol. PVP250, 1993. |
 |
Y. S. Choy, W. H. Yang, Y. J. Kim and C. S. Seok, "Characterization of Transition Temperature Behavior of A516 Gr70 Steel", Proceeding of APCFS '91, Vol. 2, pp. 923-928, China, 1991. |